Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
configuring of another MC- 32 VGMC
- Thread starter sabirawan
- Start date
- Thread starter
- #3
Go into Element manager and edit the IP Node at the bottom are details of the cards (MC32s and VGMC's) look at the existing one the H323 ID is the same for all Sig Servers and Cards. Click on add card, enter IP details, Host Name, ELAN MAC Address(sticker on the card), Card TN and the H323 ID. Save and transfer (the new card fails, not yet inserted). Then insert the card, it gets its details from the Lead Sig Server using BootP, once it is up F000 on display, go to Element manager save and transfer to failed element (new card) once it completes press the reset on the card. When it is back up F000 your done.
The only other thing is to add the DSP resource VGW channels in LD 14, you can do this before or after the red light on the card does not go out till it has channels.
The only other thing is to add the DSP resource VGW channels in LD 14, you can do this before or after the red light on the card does not go out till it has channels.
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question