Firebird Scrambler
Systems Engineer
I've been using SIP for a while now and have come across a problem on incoming calls for a new SIP account. All of my previous SIP accounts which work for incoming and outgoing have a target line which matches my SIP providers account with them in the form of digits only.
Although this new account registers OK and that I can make outgoing calls fine, incoming won't work. I'm beginning to think that the problem is that the account ID I have has a * in it and I cannot enter in * against a target line.
Has anyone else come across the same problem?. It looks as if this is a design problem as my BCM at 6.0 has system patch 022 installed OK.
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
Although this new account registers OK and that I can make outgoing calls fine, incoming won't work. I'm beginning to think that the problem is that the account ID I have has a * in it and I cannot enter in * against a target line.
Has anyone else come across the same problem?. It looks as if this is a design problem as my BCM at 6.0 has system patch 022 installed OK.
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
