Configuring ERS-5520 for CS1000E

[180990]

What are the best guidelines to configure Nortel ERS-5520 switch for CS1000E and SIG Server. What I'm looking here for is especialy when configuring the VLAN and ports where these boxes are attached to.
Switch is also used as a layer 3 switch, has a voice VLAN, data VLAN, TLAN and ELAN.

Any ideas greatly appreciated

 

[mathews84]

routing must be enabled on the tlan switch to the voice vlan.the uplink ports must be tagged on all switches with both Voice and Data vlan.All ports on the switches must be members of both voice and data vlans and each port must have pvid data vlan.It would be more simple if the TLAN and voice are the same VLAN no route has to be given( not recommended).