Configuring a SIP Phone on HiPath 4K 1

[SaeedAyman]

I'm trying to install a SIP phone on my HiPath 4K.
The thing is, I am currently running HFA phones, and it works perfectly.
but when I try to configure the SIP phones, it requires some parameters on the phone like:
- SIP Proxy
- Outbound Proxy
- SIP User ID
- SIP Auth ID
- SIP Password
- SIP Transport

Another question if I can configure both HFA phones and SIP phones on the same STMI4 Card.

 

[SaeedAyman]

OK
I think there is no problem which either SBCSU or BCSU.
I also do not think there is a problem with the phone.
It is a grandstream SIP phone, and the parameters in it are exactly how other people told me it should be.
The phone makes calls properly, but the other TDM phones in the PBX cannot makes a call to it.

 

[Imbos]

Do you have sip phone numbers in ldpln?This is for my sip phones on other station.

ADD-LDPLN:LCRPATT,0,"1670"-"X",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,212,,,1,,,,
N;

 

[SaeedAyman]

No, I did not configure LDPLN for the SIP phones, because, as for I know, I need to configure it as a station in the WABE.
In my other HFA stations, I did this (to configure phones as regular stations).
So, you are telling me that if i want to configure SIP phones, I need to configure the stations as TIE, not stations in wabe, right?

 

[Imbos]

Seems you just cant enter the number that got sip phone, its not only sip. its dial plan.
Can you show your sip stno and reg-ldpln;

 

[SaeedAyman]

Yes exactly.
The thing is, I cannot enter the LDP in LDPLN while the number of SIP phone is configured in the WABE as STN.

<ADD-LDPLN:LCRCONF=LCRPATT,DIPLNUM=0,LDP="3090",LROUTE=500,LAUTH=64;
ADD-LDPLN:LCRCONF=LCRPATT,DIPLNUM=0,LDP="3090",LROUTE=500,LAUTH=64;
H500: AMO LDPLN STARTED
H01: THE LEADING DIGITS OF LDP ARE NOT DEFINED
WITH CPS 0,1,13,14,15,16,17,18,19,20,21

F07: THE LEADING DIGITS OF LDP LEAD
WITH CPS 2,3,4,5,6,7,8,9,10,11,12,22
TO NONE OF THE DIGIT ANALYSIS RESULTS RELEVANT FOR LCR
(AMO-WABE, DAR=C0, TIE, TIEATND, SCONSI, SCONSCO, SAT)

AMO-LDPLN-111 ADMINISTRATION LCR DIALPLAN
ADD NOT COMPLETED;

 

[Imbos]

Nono... can you just show reg-ldpln. STNO of sip phone is 3090? Or write me in skype

Spoiler

Imbosss

. I have same phone, can show you how it work)

 

[SaeedAyman]

it's ok.

here is my entire LDPLN (it's all external lines)

ADD-LDPLN:LCRPATT,0,"0"-"07"-"Z",1&2&3&4&5&6&7&8,10&20&30&40&50&60&70&80,,,50,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"0900"-"Z",1&2&3&4&5&6&7&8,10&20&30&40&50&60&70&80,,,50,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"0"-"Z",1,70,,,50,,,,N;
CHANGE-LDPLN:LCRPATT,0,,"0"-"0"-"Z",2,70,,,55,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"0"-"Z",3,70,,,56,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"0"-"Z",4,70,,,57,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"0"-"Z",5,70,,,58,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"0"-"Z",6,391,,,61,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"0"-"Z",7,392,,,62,,,,;
ADD-LDPLN:LCRPATT,0,"0"-"10"-"16250",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,83,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"10"-"21"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,84,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"10"-"247",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,83,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"10"-"888",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,83,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"10"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,80,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"11"-"16250",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,85,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"11"-"222",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,85,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"11"-"333",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,85,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"11"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,81,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"12"-"250",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,86,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"124",1&2&3&4&5&6&7&8,10&20&30&40&50&60&70&80,,,50,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"12"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,82,,,37,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"13"-"Z",1,61,,,50,,,,N;
CHANGE-LDPLN:LCRPATT,0,,"0"-"13"-"Z",2,61,,,51,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"13"-"Z",3,61,,,52,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"13"-"Z",4,61,,,53,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"13"-"Z",5,61,,,54,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"13"-"Z",6,391,,,61,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"13"-"Z",7,392,,,62,,,,;
ADD-LDPLN:LCRPATT,0,"0"-"15"-"Z",1,61,,,50,,,,N;
CHANGE-LDPLN:LCRPATT,0,,"0"-"15"-"Z",2,61,,,51,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"15"-"Z",3,61,,,52,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"15"-"Z",4,61,,,53,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"15"-"Z",5,61,,,54,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"15"-"Z",6,391,,,61,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"15"-"Z",7,392,,,62,,,,;
ADD-LDPLN:LCRPATT,0,"0"-"2"-"07"-"Z",1&2&3&4&5&6&7&8,10&20&30&40&50&60&70&80,,,50,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"2"-"0900"-"Z",1&2&3&4&5&6&7&8,10&20&30&40&50&60&70&80,,,50,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"2"-"0"-"Z",1&2&3&4&5&6&7&8,10&20&30&40&50&60&70&80,,,50,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"2"-"122",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,50,,,49,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"2"-"123",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,50,,,49,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"2"-"124",0&1&2&3&6&7&8&9&10&11&12&13&14&15,50,,,50,,,,N;
CHANGE-LDPLN:LCRPATT,0,,"0"-"2"-"124",4,50,,,61,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"2"-"124",5,50,,,59,,,,;
ADD-LDPLN:LCRPATT,0,"0"-"2"-"180",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,50,,,49,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"2"-"Z",1&2&3&4&5,10&20&30&40&50,,,49,,,,N;
CHANGE-LDPLN:LCRPATT,0,,"0"-"2"-"Z",6,391,,,61,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"2"-"Z",7,392,,,62,,,,;
ADD-LDPLN:LCRPATT,0,"0"-"7"-"Z",1&2&3&4&5&6&7&8,10&20&30&40&50&60&70&80,,,50,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"804"-"Z",1,10,,,49,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"900"-"Z",1&2&3&4&5&6&7&8,10&20&30&40&50&60&70&80,,,50,,,,N;
ADD-LDPLN:LCRPATT,0,"0"-"Z",1,60,,,50,,,,N;
CHANGE-LDPLN:LCRPATT,0,,"0"-"Z",2,60,,,51,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"Z",3,60,,,52,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"Z",4,60,,,53,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"Z",5,60,,,54,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"Z",6,391,,,61,,,,;
CHANGE-LDPLN:LCRPATT,0,,"0"-"Z",7,392,,,62,,,,;
ADD-LDPLN:LCRPATT,0,"*11"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,170,,,45,,,,N;
ADD-LDPLN:LCRPATT,0,"*13"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,110,,,39,,,,N;
ADD-LDPLN:LCRPATT,0,"*14"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,120,,,40,,,,N;
ADD-LDPLN:LCRPATT,0,"*15"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,160,,,44,,,,N;
ADD-LDPLN:LCRPATT,0,"*16"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,200,,,48,,,,N;
ADD-LDPLN:LCRPATT,0,"*17"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,150,,,43,,,,N;
ADD-LDPLN:LCRPATT,0,"*18"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,180,,,46,,,,N;
ADD-LDPLN:LCRPATT,0,"*19"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,140,,,42,,,,N;
ADD-LDPLN:LCRPATT,0,"*21"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,130,,,41,,,,N;
ADD-LDPLN:LCRPATT,0,"*24"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,100,,,38,,,,N;
ADD-LDPLN:LCRPATT,0,"*29"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,190,,,47,,,,N;
ADD-LDPLN:LCRPATT,0,"*9"-"0"-"Z",0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,50,,,60,,,,N;

AMO-LDPLN-111 ADMINISTRATION LCR DIALPLAN
REGENERATE COMPLETED;


and here is the SIP phone:

ADD-SBCSU:3090,FPP,SIP,1-5-79-61,S0PP,10,10,20,20,1,1,2,1,N,0,0,,,SBDSS1,Y,Y,
0,10,N,N,,,5,0,,G711P,,"","3090","",,,,;

this is my first SIP phone to configure.

the thing is, i cannot add the LDPLN

 

[SaeedAyman]

What about the richt and ldat?

 

[Imbos]

You got sip in stmi, stn in wabe, sip sbcsu and you can call from sip phone to other phones(tdm etc) but from other phones you cant call to sip phone?

 

[Imbos]

So the right answer was:

CHA-ZAND:OPTLOAD;
)))