Configuring a BCM 200 with (2)4x16 MBM's 1

[parkgroup]

Configuring a BCM 200 with (2)4x16 MBM's; trying to make sure I have the DIP settings correct.

I left them all on, on both MBMs?

 

[cook1082]

Whwt version is it? This will determine what you do with the switches. If 3.7 or lower set card 2 ffffof.

 

[parkgroup]

THX

The upper modul being all off (ffffff) and the lower module ffffof

 

[parkgroup]

Ver 3.7

 

[parkgroup]

I have top slot 4x16 MBM set On\On\On\On\On\On
The bottom slot 4x16 MBM set On\On\On\On\Off\On

Now I get 151-154 and 211-214 lines

one station set works the other doesn't opposite to what i had earlier.

Trunk Modudes are on Buses 02 & 04

Before I could get any extensions on 25pr cable attached to the top 4x16 now I cannot get any extensions on the other cable (bottom 4x16)

Any advice as howw to get the station sets active on both 4x16s