Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
configure sniffer on 3500yl procurve
- Thread starter gau17
- Start date
You need to set the switch to mirror the traffic to a mirror port. Say port 1 is your traffic port and your Websense box is on port 2.
You'd enter something like this at the cli. You might verify this in the manual.
config
mirrorport 2
int 1 monitor
You'd enter something like this at the cli. You might verify this in the manual.
config
mirrorport 2
int 1 monitor
- Status
Similar threads
- Locked
- Question