Configure IMA card for new circuit

[techguru69]

We are installing a new circuit from our Internet provider that is a 3MB ATM. We have a 2620 from another location we are going to use for this, and we bought a 4port IMA card from Cisco. We will only be using 2 of the ports.

My question is - as it seems that our provider isn't the most forthcoming on how we configure our end of the circuit (router config), I asking if anyone has done this, what config statements do we need to get it up and running.

TIA

 

[eurobadger]

Hi

This is probably a good place to start..

http://www.cisco.com/en/US/tech/tk39/tk356/technologies_q_and_a_item09186a0080111162.shtml

EB

 

[medialines]

Hi Hoffmancorp, hope you got sorted and are up and running. I have a similar task to sort out. I too am providing some 3MB ATM connections using 2 E1 lines and an IMA card. I'm not sure whether to order G703 clear or G704 structured lines from my Telecom provider. Can you help?