techguru69
IS-IT--Management
We are installing a new circuit from our Internet provider that is a 3MB ATM. We have a 2620 from another location we are going to use for this, and we bought a 4port IMA card from Cisco. We will only be using 2 of the ports.
My question is - as it seems that our provider isn't the most forthcoming on how we configure our end of the circuit (router config), I asking if anyone has done this, what config statements do we need to get it up and running.
TIA
My question is - as it seems that our provider isn't the most forthcoming on how we configure our end of the circuit (router config), I asking if anyone has done this, what config statements do we need to get it up and running.
TIA