Configure customized ring tones on CME

[EchoSpark]

I am trying to configure customized ring tones on 7961 ip phone installed on CME4.0.
I have copied the files to flash, and done all the configuration but it doesnt reflect on the ip phones settings.What should i do?
Here is the running config






sh run
Building configuration...

Current configuration : 5500 bytes
!
! Last configuration change at 16:45:17 UTC Tue May 8 2007 by pinky
! NVRAM config last updated at 16:45:19 UTC Tue May 8 2007 by pinky
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
! card type command needed for slot/vwic-slot 0/0
logging buffered 51200 warnings
!
no aaa new-model
!
resource policy
!
ip subnet-zero
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 149.17.18.2
!
ip dhcp pool cme-pool
network 149.17.18.0 255.255.255.0
default-router 149.17.18.1
option 150 ip 149.17.18.1
!
!
no ip domain lookup
ip domain name yourdomain.com
!
!
voice-card 0
no dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
!
crypto pki trustpoint TP-self-signed-3810631294
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3810631294
revocation-check none
rsakeypair TP-self-signed-3810631294
!
!
!
!
!
!
!
!
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0/0$
ip address 149.17.18.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip classless
!
!
ip http server
no ip http secure-server
ip http path flash:
!
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 23 permit 149.17.0.0 0.0.255.255
access-list 23 permit 149.17.18.0 0.0.0.255
!
!
!
tftp-server flash:cnu41.2-7-6-26.sbn
tftp-server flash:CVM41.2-0-2-26.sbn
tftp-server flash:Jar41.2-9-2-26.sbn
tftp-server flash:TERM41.7-0-3-0S.loads
tftp-server flash:term41.default.loads
tftp-server flash:term61.default.loads
tftp-server flashistinctiveRingList.xml
tftp-server flash:RingList.xml
tftp-server flash:Jamaica.raw
tftp-server flash:Sax2.raw
tftp-server flash:AreYouThere.raw
tftp-server flash:Analog1.raw
tftp-server flash:Bass.raw
tftp-server flash:Chime.raw
tftp-server flashop.raw
!
control-plane
!
!
!
!
!
!
dial-peer cor custom
name outgoing
!
!
!
!
!
!
telephony-service
load 7961 TERM41.7-0-3-0S.loads
max-ephones 24
max-dn 48
ip source-address 149.17.18.1 port 2000
max-conferences 8 gain -6
moh music-on-hold.au
web admin system name pinky password pinky
dn-webedit
time-webedit
xmltest
!
!
ephone-dn 1 dual-line
number 1001
description Test 1
name Test 1
!
!
ephone-dn 2
number 1003
description Test 2
name Test 2
!
!
ephone-dn 3 dual-line
number 1002
description Test 3
name Test 3
hold-alert 30 originator
!
!
ephone-dn 4 dual-line
number 1004
description fdfss
name fsff
hold-alert 30 originator
!
!
ephone-dn 5 dual-line
number 1006
description test 6
no huntstop
hold-alert 30 originator
!
!
ephone 1
mac-address 001B.535C.6E51
button 1:1
!
!
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege level of 15.
Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use.

For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to

http://www.cisco.com/go/sdm

-----------------------------------------------------------------------
^C
!
line con 0
login local
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler allocate 20000 1000
ntp master
ntp server 149.17.18.1
ntp server 149.17.18.100
!
end

 

[VoIPGuyNSC]

This may sound overly obvious, but have you reset the phones yet? The phones only pull down the ringlist upon their initial registration.

If not, try Settings, **#**.

John Lever
Senior Systems Engineer
Diversified Computer Solutions
Columbia, SC

 

[EchoSpark]

I have tried that, didnt work. Can someone please help.

 

[EchoSpark]

i have restarted the phone several times. still didnt work. Can someone please help

 

[Dowy]

Have a look at this link to the cisco website, hopefully it will help.

http://www.cisco.com/en/US/products..._guide_chapter09186a00807d5f4f.html#wp1011285