Configure an new teleworker

[gbon851]

How do I configure a new teleworker for my Mitel 3300IP with a 5330IP phone? I've never done this before.

 

[kwbMitel]

It might help if you told us what you do know rather than what you don't.

Minimum requirements
- Boot phone while holding down 7 key and enter TW server address
- Enter TW pin to register phone with TW server(hopefully pin is configured on TW server)
- Enter 3300 Pin - to register phone with 3300.

There could be anywhere from 1 to 100 more steps but you ask a simple question you get a simple answer.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[slapin]

1. You open up a book "Installation manual". Read first and all subsequent pages. Follow instructions and recommendations. Usually it works. Normally this kind of documents slightly bigger then average post on the internet forum. If you need some specific information, please ask specific question. For example: How to configure teleworker mode on 5330 IP phone? How to register a set on the Teleworker gateway? How to configure ICP on the teleworker gateway?
2. You call professional services company and let them do it for you. If you don't know who to call, go to

http://www.mitel.com,

find a phone number of their office and call them. Mitel representative will locate a VAR (Value Added Reseller) in your area.

 

[Supernova99]

Here is a Config Guide for teleworker

Share what you know - Learn what you don't