Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Config Note for Nortel/MM SIP Integration 1

Status
Not open for further replies.

Hudson22

Vendor
Nov 8, 2007
154
US
All,
Has anyone come across a CN that has SIP Integration between a Nortel CS1000 and MM with the new S8800's?
Thanks in advance,
Hudson22
 
Hudson;

It appears the only way to get this working (at least as certified by Avaya) is to use an Audio Codes gateway.

You will need to go to:


Click on the Downloads Tab, then expand PBX config notes for Avaya MM. Select Nortel CS 1000 T1.

This then references the Avaya config note for integrations:

Configure the PBX as specified in the Avaya Modular Messaging PBX Configuration Note “cn88024.pdf” Section 5.0.

You need to setup the PBX as T1 and MM as SIP - the audio codes box will do the conversion. Note too that the download from Audio codes contains a config file that needs to be loaded to the Audio Codes gateway.

Hope this helps.
 
Yes and it works pretty good. I was told that you can use a session manager to do this but i can't find any DOC's that show it.

Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Hi, the bulletin is for CS1000 4.5, would this work with CS1000 3.0? anyone know?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top