Config Note for Nortel/MM SIP Integration 1

[Hudson22]

All,
Has anyone come across a CN that has SIP Integration between a Nortel CS1000 and MM with the new S8800's?
Thanks in advance,
Hudson22

 

[pabxdude]

Hudson;

It appears the only way to get this working (at least as certified by Avaya) is to use an Audio Codes gateway.

You will need to go to:

http://www.audiocodes.com/avaya-modular-messaging

Click on the Downloads Tab, then expand PBX config notes for Avaya MM. Select Nortel CS 1000 T1.

This then references the Avaya config note for integrations:

Configure the PBX as specified in the Avaya Modular Messaging PBX Configuration Note “cn88024.pdf” Section 5.0.

You need to setup the PBX as T1 and MM as SIP - the audio codes box will do the conversion. Note too that the download from Audio codes contains a config file that needs to be loaded to the Audio Codes gateway.

Hope this helps.

 

[Hudson22]

Thanks,
That helped.
Hudson22

 

[KenMeans]

Yes and it works pretty good. I was told that you can use a session manager to do this but i can't find any DOC's that show it.

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[riverwalk]

Hi, the bulletin is for CS1000 4.5, would this work with CS1000 3.0? anyone know?

 

[KenMeans]

Yes it does work

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)