config dti2 with r2mf

[jftg73]

HI, I NEED SETUP A NEW DTI FOR OTHER TELCO BECAUSE WE CHANGE OF TELCO AND MY DUDE IS, HOW I CAN TO CONFIGURE MY SIGNALING R2MF FOR RECEIVE THE CALER ID , SOME IDEAS THANKS.

 

[johnpoole]

here in the states we only have to match the remote switch type and release on the d channel, after the layer one is up. Most new pri run b8zs/esf. some switches want md2 for the rcap on your d, some do not accept service messages (LD 96) some hve to be vod other vce (vsel in ld 16). without having worked in your area i would suggest you try these options (not all at one time)

john poole
bellsouth business
columbia,sc