conference on a ip phone 2

[bozze]

Hi.

I saw an earlier thread (thread806-1455936) regarding making conference on an IPphone using suffix key.
Did you get it to work?
Regardless of that the configfile say that suffix 3 should be for conference and that the ASPAC.s are correct we can´t get it to work.
Any clues?

 

[whosrdaddy]

what type of IP phone do you have?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[bozze]

It is mostly the "little" ones 4422 that has the problem since the bigger has the softkey option for conference. But none of them can use the button 3 to start a conference.

 

[whosrdaddy]

ok, I need more info:

what is your pbx version? (MD110(CADAP or TSE (ts_about)
what ip boards are you using (ELU32, IPLU)
what is the firmware of the board (CNBIP:BPOS=xx-xx-xx
what is the firmware of your phones (IPERP?

what is the content of your config file? post it here



/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[bozze]

I don´t think it have ever worked, or is it a known fault?
The pbx i TS 3.2 sp2 but I think we have the same in TSW.s.
IPLF R3F.

No matter what fw we use for the phones, no difference that I have seen anyhow.

 

[whosrdaddy]

I got it working in the lab.

show your config file + iperp

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[bozze]

Hi.
Here are two examples and the config file.
98105 R3A/R7D/R3L DBC42202
99698 R2E/A/R7D/R3L DBC42502



[System]
;--------------------------
; File: d42x02-config.txt
; Product id and version: CAA 158 0042 R7D
; Release date: 2008-09-11
;-------------------------
; The system parameter may have the values MD110, WEBSWITCH3, MX-ONE, MD-E or BP
;System=WEBSWITCH3
;System=BP
;System=BP-R15
;System=BP-R16
;System=MD110
;System=MD-E
System=MX-ONE
;System=IMT
OverLap=YES
RRQTtl=600 ;only for H323
GatekeeperID=LIM*
;Domain=aastra.se
PrimaryGKAddress=192.66.9.114
;SecondaryGKAddress=192.168.0.1
GatekeeperDiscovery=NO
;AdminPasswd=RQzceyb9c9
;LogOffRestriction=LogOffAllowed
;LogOffRestriction=DefaultNumberUsed
;LogOffRestriction=PermitIndividualLogOn

[Software]
;-----------------------------------------------
; The following files are mandatory:
; Bootrom d42x02-boot_Rev.dat (CAA158 0044)
; Application d42x02_Applic_Rev.dat (CAA158 0043)
; Configuration File d42x02-config.txt (CAA158 0042)
; The following files are optional:
; Language File d42x02-Lang_Rev.txt (CAA158 0045)
;-----------------------------------------------

;All DBC42x02 (x=0,2 or 5) shall use same boot ,
;application and language file. It shall be stored
;in the dbc42x02 directory.
BootFile=/dbc42x02/d42x02-boot_R3L.dat
BootVersion=R3L

ApplicationFile=/dbc42x02/d42x02-applic_R7D.dat
ApplicationVersion=R7D

[802.1x]
LANAccessControl=NO
;StoreUserIdPassword=YES
;UserType=PHONE ;PHONE or USER
;UserIdentity=
;UserPassword=

[Absence]
Profile=*10*profileNo#,#10#
FollowMe=*21*extensionNo#,#21#
ExtFollowMe=*22#extensionNo#,#22#
AbsenceReason=*23*reasonCode#,#23#
Lunch=0*hhmm
Busy=1
Absent=2*hhmm
Meeting=3*hhmm
Trip=4*mmdd
Course=5*mmdd
Vacation=6*mmdd
DayOff=7*mmdd
GoneHome=8*hhmm
Illness=9*mmdd
;OfficialMatter=2*hhmm
;FreeTime=6*mmdd
;Special=9*mmdd
;ParentalLeave=

[Authorization] ;replaces fthe following code with "-"
Code=*61* ;Account code for Standard Appl. System
Code=*72* ;Auth. code for Standard Appl. System
Code=*73* ;Lock Central auth. code
Code=#73* ;Unlock cent. auth. code
Code=*74* ;Change individ. ath. code
Code=*75*-*n# ;Dial with indiv. auth. code. n means that the nr will be visible
Code=*76* ;Lock individ. auth. code
Code=#76* ;Unlock individ. auth. code

[AutoNeg]
AutoNegLANPort=YES ;When AutoNeg is set to YES, Speed and Duplex will not
;DuplexLANPort=HALF ;be read. The resulting speed and duplex will be the
;SpeedLANPort=10 ;result of the negotiation between the phone and the
AutoNegPCPort=YES ;network device it is connected to(switch/hub/PC).
;DuplexPCPort=FULL
;SpeedPCPort=100
;network device it is connected to(switch/hub).
;[BackupGK]
;System=WEBSWITCH3 ;System=MD110 not allowed
;IPAddress=192.168.0.1

[Codecs]
; G.711 is mandatory but the priority order is optional
G.711A
G.711U
G.729A
G.729AB
G.723

[DefaultPacketSize]
DefaultMsPerPacket711=30 ;10,20 or 30ms. If not 30, then may not be possible to call DBC42x01 & DBC413 phones(that don't support framesize negotiation).
DefaultMsPerPacket729=30 ;10,20,30,40,50 or 60ms. If not 30, then may not be possible to call DBC42x01 & DBC413 phones(that don't support framesize negotiation).

[DIFFSERVTCP]
TrafficClass=2 ;Class B
DropPrecedence=2 ;Medium drop percentage

[DIFFSERVUDP]
TrafficClass=5 ;Expedited Forwarding
DropPrecedence=3 ;High drop percentage, recomended for EF

[Display]
ShowDTMFDigits=YES
ShowIPSettings=Enabled ;Enabled/Disabled

;[Emergency]
;System1=MD110
;Address1=192.168.0.1
;Port1=1720
;System2=BP-R15
;Address2=192.168.0.1
;Port2=1720
;EmergencyNr=112
;A-Number=077601
;NumberingPlanOfA-Number=ISDN ;ISDN/Private
;RouteId=PASSW

[FunctionKeysDBC425]
;CallBack=1
;FollowMe=2
FreeOnSecond=3
;MessageWaiting=5
;Transfer=6
Menu=
;Conference=
;CallPickUp=
;CallWaiting=
;Intrusion=
;HomeURL=10
;DirectoryURL=11
EnablePBXStoring=YES

[FunctionKeysDBC422]
;Conference=0
;Transfer=1
;Settings=5
FollowMe=6
;MessageWaiting=7
FreeOnSecond=8
;CallList=9
;CallPickUp=
;CallWaiting=
;Intrusion=
EnablePBXStoring=YES

[FunctionKeysDBC420]
;Conference=0
;Transfer=1
FollowMe=6
;MessageWaiting=7
FreeOnSecond=8
;CallPickUp=
;CallWaiting=
;Intrusion=
EnablePBXStoring=YES

;[Handsfree]

[IPPhoneAdministrator]
IPPhoneAdministrator=YES ;Default = YES
;ServerAddress=192.168.0.1 ;Optional
;ServerPort=8080 ;Optional

[Language]
;Default language is English. Optional languages can be selected
LanguageFile=/dbc42x02/d42x02-lang_R7C.txt
LanguageVersion=R7C
OptionalLanguage=EN,*08*0#
OptionalLanguage=FR,*08*1#
OptionalLanguage=DE,*08*2#
OptionalLanguage=ES,*08*3#
OptionalLanguage=IT,*08*4#
OptionalLanguage=SV,*08*5#
OptionalLanguage=FI,*08*6#
OptionalLanguage=DA,*08*7#
OptionalLanguage=NO,*08*8#
OptionalLanguage=NL,*08*9#
OptionalLanguage=PB,*08*9#
;OptionalLanguage=PL,*08*9#
;OptionalLanguage=PT,*08*9#
;OptionalLanguage=XL,*08*9#
;OptionalLanguage=SK,*08*9#
;OptionalLanguage=CS,*08*9#
;OptionalLanguage=ET,*08*9#
;OptionalLanguage=HU,*08*9#
;OptionalLanguage=LT,*08*9#
OptionalLanguage=SL,*08*9#
StartupLanguage=EN

[LEDs]
Cad0=185,5,5,5 ; LED flash 0 cadence, first on,first off,second on,second off: in a call
Cad1=50,50,0,0 ; LED flash 1 cadence: call parked
Cad2=30,30,0,0 ; LED flash 2 cadence: incoming call

[L2QOS]
PhonePort=6,1 ;prio (0-7) ,VID(1-4095)
PCPort=0,2 ;prio (0-7) ,VID(1-4095)
LANPort=0,0 ;MAC based VLAN/802.1Q based VLAN , untagged/tagged PC originating traffic

[NewCallClearing] ;When system=MX-ONE and in H.323 mode
newCallClearing=YES ;YES: MX-ONE3.0 SP4 or MX-ONE3.1 SP1 or later is used

;[OMD]
;SNAddress=192.66.9.20
;SNPort=1700

[Password]
PasswordInputFormat=alphanumeric ;alphanumeric/digit
PINorPassword=Password ;PIN/Password
ServiceCodeChangePIN=*74*

[RingCads]
Internal=20,100,0,1,0,0 ;Internal ring cadence
External=7,6,7,100,0,0 ;External ring cadence
Callback=6,8,6,8,0,0 ;Callback ring cadence
Extra=6,8,6,8,6,8 ;Extra ring cadence
Delay=7 ;Delay for MNS keys in second

[Security]
Security=DISABLED ;ENABLED or DISABLED States if SRTP & TLS shall be used
CertificateValidate=NO ;States if the phone shall validate the server certificate. If YES, required that NTP-server parameter is configured.
SecurityFallback=YES ;states if it shall be allowed to continue the registration in a not secure way, if the TLS negotiation fails.
SaveUserPassword=YES
SignallingEncrypted=YES ;YES:the signalling is encrypted; This is the default value. NO:NULL cipher which means that no encryption of the signalling is done but
;the signalling sequence is the same as when the signalling is encrypted. This option can be used at fault locating.

;[SIP]
SIPDomain=MX3-lim1.terminallab.ebc.aastra.se
SIPProxyAddress=130.100.26.166
SIPProxyPort=5060
SecureSIPProxyPort=5061
;SIPProxyAddress=192.168.0.1
;SIPProxyPort=5060
;SecureSIPProxyPort=5061
SIPUseTelURI=NO
SIPHookFlash=DTMF_INFO_!
;SIP_DTMF=INFO ;RFC2833 or INFO

[STOREPHONEBOOKS]
EnableStoring=NO

[SuffixServices]
Intrusion=8
CallWaiting=4
CallBack=5
CallPickUp=6
Conference=3

[Time]
TIMEZONE=CET:60:0:032901:102501
NTP-server=192.66.9.114

[Tones]
Dial tone=
0,0, ; One cadence, One frequency
500,0,0,0,0,0, ; 500ms on, 0ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0,
0,0 ; Tone in Voice is off, sine wave

Special dial tone=
1,0, ; One cadence, One frequency
500,50,0,0,0,0, ; 500ms on, 50ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Busy tone=
1,0, ; One cadence, One frequency
500,500,0,0,0,0, ; 500ms on, 500ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Alerting tone=
1,0, ; One cadence, One frequency
1000,4000,0,0,0,0, ; 1000ms on, 4000ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Congestion tone=
1,0, ; One cadence, One frequency
200,200,0,0,0,0, ; 200ms on, 200ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Special information tone=
3,4, ; Three cadences, Three frequencies
333,1,333,1,333,1000, ; 333ms on, 0ms off, 333ms on, 0ms off, 333ms on, 1000ms off
950,-10,1400,-10,1800,-10, ; 950Hz, -10dbm0, 1400Hz, -10dBm0, 1800Hz, -10dBm0
0,0 ; Tone in Voice is off, sine wave

Call waiting tone=
2,0, ; Two cadences, One frequency
200,600,200,3000,0,0, ; 200ms on, 600ms off, 200ms on, 3000ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Offhook queuing tone= ;also used as verification tone for BP-R15
1,0, ; One cadence, One frequency
2000,990,0,0,0,0, ; 2000ms on, 990ms off, 0ms on, 0ms off, 0ms on, 0ms off
1400,-10,0,0,0,0, ; 1400Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

On hold tone= ; On hold tone
2 ,1, ; Two cadences, Two frequencies
10,150,10,5000,0,0, ; 10ms on, 150ms off, 10ms on, 5000ms off, 0ms on, 0ms off
400,-10,300,-10,0,0, ; 400Hz, -10dbm0, 300Hz, -10dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off , sine wave

External dial tone=
0,0, ; One cadence, One frequency
500,0,0,0,0,0, ; 500ms on, 0ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0,
0,0 ; Tone in Voice is off , sine wave

Waiting voice tone=
1,0, ; One cadence, One frequency
30,330,0,0,0,0, ; 30ms on, 330ms off,
425,-10,0,0,0,0, ; 425Hz, -10dbm0,
0,0 ; Tone in Voice is off , sine wave

[WAP]
WapProxyIP=192.168.0.1 ; Proxy IP address
;WapProxyPort=9200
WapProxyPort=8080
AddressWithoutProxy=192.168.0.1 ;IP address to the corporate directory server, if no proxy shall be used
DirectoryAddress=192.168.0.1/mobileexec
;DirectoryAddress=192.168.0.1/cgi-bin/home.cgi?num=%NUM%&ip=%IP% ;could be used in MD-E
DirectoryServer=DME ;If the corporate directory is DNA Mobile Executive, set to DME, otherwise Generic
HomeAddress= ; wapportal (i.e wap.yahoo.com)
MaxAttempts=3 ;2-8
RetransPeriod=2000 ;2000-7000
CountryCode=46 ;The code of the country where the PBX is located
RouteAccessNumber=00 ;The route access number
CountryCodePrefix=00 ;The prefix of the code of the country where the PBX is located
AreaCodePrefix=0 ;The prefix of the area code in the country where the PBX is located
AreaCode=8 ;The area code in the country where the PBX is located

;[WebServer]
;webInterfaceForUser=ENABLED ;ENABLED, ENABLED_WITH_DEFAULT_PWD or DISABLED, ENABLED as Default

 

[whosrdaddy]

ok,

to make this clear:

supported suffix services in H323 mode are:

?Intrusion
?CallWaiting
?CallBack
?CallPickUp

in SIP mode you have:

?Intrusion (default value = 4)
?CallWaiting (default value = 5)
?CallBack (default value = 6)
?CallPickUp (default value = 8)
?Conference (default value = 3)

so if you are working in H323, you MUST use the function key.


/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[bozze]

Yes,thanks I saw something about that in Alex.
When it was working in your lab was that an SIPphone??

Thank you for you time!!

 

[whosrdaddy]

yeah, it was SIP, that's why I was thinking it worked.

Cheers,
Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!