Conference MeetMe 1

[OldSchool70]

IP Office Server Edition 9.0 Service Pack 7 -
I have setup a MeetMe Conference Bridge that prompts the user for a Conference ID (user's extension) and a PIN (can be changed by user). Callers are put on hold until the Moderator joins the conference. The moderator can access a menu to change the conference PIN.
Questions:
Is it possible for the Moderator and the Caller to have separate PINs?
Is it possible to create longer Conference IDs (other than the user's extension number)?

 

[AACon]

Is it possible for the Moderator and the Caller to have separate PINs?
--Yes, why not? You would need to make some changes to your modules to do this...but basically have one pin to check if you come in one way, and another if you come in some other way.

Is it possible to create longer Conference IDs (other than the user's extension number)?
--Sure, why not. You'd have to figure out some way to translate it, however. Either with shortcodes, or with a database.

-Austin
ACE: Implement IP Office

 

[zoomatomic]

This is what I have set up for a customer using pins, its on a per user basis, I'm sure there is a way of making it more generic but I haven't had time to play with it.



ACSS - SME
ASPS - SME

http://www.vodafone.ie/readybusiness

 

[oceanSD]

Here's another one that doesn't have the Attendee pin, but does use variables. I'm planning on adding the Attendee PIN's to it, but just haven't had the time yet...
HOWTO: Create a Conference MeetMe menu with TUI modifiable passwords

 

[zoomatomic]

oceanSD That basically what I have with PINS included

ACSS - SME
ASPS - SME

http://www.vodafone.ie/readybusiness