Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CONFERENCE KX-TS 208
- Thread starter aprieto
- Start date
Why are you trying to bridge a station to a CO line?
If you want to add another party use 3-way calling to conference. The station ckt is not designed for bridging and Panasonic does not recommend doing that because it causes an imbalance, hence you get noise!
If you want to add another party use 3-way calling to conference. The station ckt is not designed for bridging and Panasonic does not recommend doing that because it causes an imbalance, hence you get noise!
- Thread starter
- #3
the user has one telephone of 2 lines who brings the conference button and the button of hold to be able to speak to the same time the line 1, line 2 and the user, then appears noise and the three cannot speak, this single one happens when the lines are of 24v and 48v but when the lines are of 24v is no problem nor when the lines are of 48v in this cases can speak all three and there isn´t noise.
regards
aprieto
regards
aprieto
- Status