conference intrusion tone

[hrac]

Hi,
after upgrading from BC10 to TSW(SP1,SP3,SP4)there is no repeating intrusion beep during established conference call.
I tried to find some AS parametr but there is none.
In Alex is info Tone messages every 20 sec. during conf. call.

 

[whosrdaddy]

check ASPAC 100:

0 No tones
1 Provide tone for normal conference
2 Provide tone for operator conference
4 Provide tone for normal intrusion
8 Provide tone for ACD intrusion

you need to add values for the correct working (so normal conference+operator conference, value = 3)

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[hrac]

daddy thanks for advice but I have got parval=7 but doesnt work , if zou have some other idea tell me .
thanks

 

[whosrdaddy]

mmm, weird. wat market are you in? maybe intrusion tones are not needed for your market?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[hrac]

Daddy
maybe you are right,our market is Czech(Austria)
but in BC10 was everything OK,I dont know why this feature
is changed for MX One.
I think it is necessery to contact some designer.
thanks