Conference Beep-tone on MD110 2

[opleyer]

Hi,

does anyone know how to disable to repeating beep-tone when you initiate a conference on MD110? Really annoying...
Thanks in advance

Oliver

 

[naltalite]

Depends on which Application system and BC release you are using. In the swedish Application system you can turn it off whith ASPACARNUM=166,PARVAL=1; (BC10)

 

[MD6]

Hi,

May be necessary patch for disable Conference Tom. What your MD Version and your country?

MD6

 

[opleyer]

Thanks!

To answer both questions at one time:

MD110: BC10.H/S0105

Country is Luxembourg, but I have no clue if this system has been setup in a country-specific way.

 

[opleyer]

And btw:
For your command, I checked on ASPAPARNUM =ALL;

There is no 166 assigned.

 

[ysgoh88]

actually that is the optional thing. there are a O&R patch for that..you can't just change that as what you want and will not be able to see that.

 

[ysgoh88]

you can request the patch from ericsson itself.

 

[MD6]

HI,

Please log command "PCLOP:UNIT=MPP" and send me. I think that i have the patch for no Conference Tone.

MD6

 

[opleyer]

UNIT:MPP LIM:1
CI TYPE STATUS SIZE IA/SIGNO/ADDR CORRSTART
S87056A PROGRAM CONF 48 00000672 0000A89A
S87056A PROGRAM CONF 62 00000A7C 0000A8CA

 

[MD6]

Hi,

I have the patch for LOWER AND SHORTER CONFERENCE TONE. The tone is changed from 1000ms for 500ms, but i think that tone may be lower.
If you have intereste, please contact-me.

MD6

 

[opleyer]

Sure. you can contact me through email
support.acd@club-internet.fr

 

[BLFDP]

PLEASE MD110 BC8, FLASH is changed from 100ms for 250ms configuration
jwsouza@mamore.com.br

 

[MD6]

hI,

The changed Time Flash is valid for all analogue extensions.

 

[Guest_imported]

In BC11,

PARNUM=100,PARVAL=0(Tone enabled)
                  1(No extension conference tone)
                  2(No operator conference tone)
                  3(No operator or extension conference tone)

might work in bc10, not sure?

 

[MD6]

Hi,

In Dynatext BC10 not exist parnum=100.

 

[UKboy]

Hi, this does not show in dynatext as is region specific and is patched per country rather than being default loaded by Sweden, it will work if the patch is loaded into your switch.

The uk standard for BC7/BC8/BC9/BC10 is as below,
Parnum=100, parval=x;


CONFERENCE AND INTRUSION TONES PROVIDED = 00 (DEFAULT CASE)

INTRUSION TONE ONLY = 01

CONFERENCE TONE ONLY = 02

NO CONFERENCE OR INTRUSION TONES = 03