Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

conference 3 calls with analog phones? 1

Status
Not open for further replies.

karate777caesar

Technical User
Jun 15, 2005
25
US
How can an analog phone be used to conference 3 or more people? Is there a code that is entered to get into conference mode?
 
I understand that with ld 10, specify cls to be xfa, and c6a. How does the eu do it? Does the eu type #1, #2, etc.?
 
Thank you. In the X11 Software Features guide, page 675, it specifies swtch hook / flas. In the same paragraph, with the six part conference capability it says to implement Conference Control by dialing SPRE + 87. What does this mean? Do a flashhook then SPRE + 87, plus the number to conference?
 
My guess is that if you establish a call than hit the switchhook and call someone else and their answering machine or somethine else picks up than you can hit spre+87 to disconnect the call because if you just hit swithhook again it will conference in the call.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top