I have an NT 4.0 Domain with 23 servers. The PDC and BDC are the Master Browser and Backup Browser respectively with no other Servers/Workstations running Computer Browser service. The Problem is I have 4 Productions Servers that run Terminal Server with all current SP and hotfixes with Metaframe 1.8 and at peak user login times each of these 4 servers disappear from the browse list in Network Neighborhood, Server Mgr, etc. It starts once any of these servers gets to close to 30 users and at the end of the day when users are less the servers reappear in the browse list. All these servers can be mapped to, pinged or name resolved but just doesn't show up in browse list and I need them to show in browse list for specific Administration with Metaframe during peak time. Any suggestions on what would cause this and a resolution would be greatly welcome.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Computer Browsing with NT 4.0
- Thread starter qjones
- Start date
salserocito
MIS
What protocols are your running?
Does this happen when a specific User logs in? Or just when you get close to 30 Users? How much RAM do you have on these 4 Servers?
Also, check the Event Viewer to see if there are any messages that appear.
Good Luck!
Does this happen when a specific User logs in? Or just when you get close to 30 Users? How much RAM do you have on these 4 Servers?
Also, check the Event Viewer to see if there are any messages that appear.
Good Luck!
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question