compatibility

[telemarv]

I have just upgraded a mics from 2.0 to 6.1 using the upgrade tool all went well except i now have no voice mail. Its a NAM 3.0. Is there a compatibility issue between 6.1 and NAM 3.0?

 

[luv2ski]

yup needs to be 4.1

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[telemarv]

Sucks to be me!! Thanks

On a side note. I tried to put the old 2.0 software cartridge back into the MICS hoping to at least return them to a system that had voice mail until I did something about upgrading the voice mail system. Anyway it wouldn't come up. I have no clue as to why it wouldn't unless maybe 6.1 does something in the KSU to prevent older versions from working. I had used the upgrade tool to tranfer the data base from the old cartridge to the the new NVRAM and now the old cartridge doesn't work. Weird

 

[Arr]

To go backwards one must take the KSU to StartUp and about 2-3 seconds after it starts to reprogram, unplug the KSU. Then insert the old Rls 2 software and let the KSU finnish the initialization. You then load the back up you made of the config and you're done.

Cheers
PhM

 

[sentel]

will cics 6.1 work with flas 1.7.0

 

[MarvO1]

Sentel, you need 1.9 on the Flash

MarvO said it

 

[telemarv]

Upgraded the NAM to 4.1 (actually had to go to 4.0 first and add 16 MB of RAM). all is working thanks for the input