I had this problem awhile back, but figured out that I didn't have enough mag space for the backups to complete. SO, I added a SAN drive with 400GB of room -- to the previous 200GB of HDD mag storage.
Afterwards, changed some of the agents to point to the new Storage Policy (for the SAN).
Unfortunately, the problem has not been resolved. I still have to go into CommVault EVERY day, massage the old backups out, complete manual Data Aging, kill a few 10%-30% completed jobs -- and then restart the essential jobs.
"NO RESOURCES" is the primary message I see in the CVAdmin Console.
It's a pain. Could anyone give me advice on what to do next?
CommVault Galaxy 6.x
Windows Server 2003
6 - 38.4GB drives in server (Primary)
400GB LUN on SAN (Primary)
Certance LTO (8 Tape) Library (Aux & DR Backups)
Afterwards, changed some of the agents to point to the new Storage Policy (for the SAN).
Unfortunately, the problem has not been resolved. I still have to go into CommVault EVERY day, massage the old backups out, complete manual Data Aging, kill a few 10%-30% completed jobs -- and then restart the essential jobs.
"NO RESOURCES" is the primary message I see in the CVAdmin Console.
It's a pain. Could anyone give me advice on what to do next?
CommVault Galaxy 6.x
Windows Server 2003
6 - 38.4GB drives in server (Primary)
400GB LUN on SAN (Primary)
Certance LTO (8 Tape) Library (Aux & DR Backups)