Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Communications Manager 3.0
- Thread starter cduff
- Start date
Looks to me like it's all bug fixes...
This document shows the highlights and enhancements.
have a look on this document
... meet-me-conference up to 300 participants !!! ...
... meet-me-conference up to 300 participants !!! ...
During a local users group meeting, Avaya talked about the new Meet-Me. Keep in mind that it requires their bridging hardware to increase the number of participants. Otherwise it still has the same 6 limit. But at least the bridge hardware can seamlessly integrate with the PBX.
Another cool feature is the new Medpro board. The new one that's supported in CM 3.0 can handle 320 channels! Using this and IPSI boards, you can also run your MCC EPNs over an IP network.
Another cool feature is the new Medpro board. The new one that's supported in CM 3.0 can handle 320 channels! Using this and IPSI boards, you can also run your MCC EPNs over an IP network.
New important features:
1
IGAR: dynamic rerouting of IP calls when the main location link or processor fails.
2Nokia Symbian series 6 softphone lets you use avaya features on your mobile.
3 use of non Avaya SIP phones (though with some limitations).
4distribute announcements to remote locations an run them locally (automatic) for load and survivability reasons
5sidestep to other vectors from a vector and resume processing on the original one later (program your opening times and holidays only once etc.)
These are just some of many new features.
1
IGAR: dynamic rerouting of IP calls when the main location link or processor fails.2
Nokia Symbian series 6 softphone lets you use avaya features on your mobile.3
use of non Avaya SIP phones (though with some limitations).4
distribute announcements to remote locations an run them locally (automatic) for load and survivability reasons5
sidestep to other vectors from a vector and resume processing on the original one later (program your opening times and holidays only once etc.)These are just some of many new features.
- Status
Similar threads
- Question