Commands

[kuloft]

Anyone knows what is the command to see how many connections are open at one time.

thanks

 

[ChrisAC]

As every connection must have an xlate slot you could use;

pixfirewall# sh xlate count
60 in use, 722 most used

Chris.

**********************
Chris A.C, CCNA, CCSA
**********************

 

[shazzzzam]

Below is what I get when I type sh xlate count

PIX520UR# sh xlate count
usage: show|clear xlate [global|local <ip1[-ip2]> [netmask <mask>]]
[gport |lport <port1[-port2]>]
[interface <if1[,if2]>]
[state <static[,portmap][,norandomseq][,identity]>]
[debug]
Type help or '?' for a list of available commands.


Cisco Secure PIX Firewall Version 5.1(5)
Compiled on Fri 22-Jun-01 20:15 by morlee
Finesse Bios V3.3

PIX520UR up 43 days 22 hours

Hardware: AL440LX, 128 MB RAM, CPU Pentium II 233 MHz
Flash AT29C040A @ 0x300, 2MB
BIOS Flash AM28F256 @ 0xfffd8000, 32KB

Licensed connections: 128

sh conn
151 in use, 9472 most used

If the license shows 128 connection and when I type sh conn it show 151 does it mean that 22 are not connected??

 

[ChrisAC]

128? What does the output of 'sh activation-key' give?

Chris.

**********************
Chris A.C, CCNA, CCSA
**********************