Command line script and phone codes

[NYPQ-EN]

Good morning,

I have 2 questions:

Question #1 When some one creates a phone via Openscape Assistant, is there a way where I can see all of that programming via the CLI and see all of the AMO commands? Sort of Reverse Engineering - for example you can find a website and reverse engineer it to see the script of commands that were used to create it.
Is there a way to find any station in Openscape Assistant and in the CLI see the script of commands that were done to create that station?


Question #2

What AMO will show me what short cut phone codes are programmed into the Hi-Path 4000?
For example - #5 on our system puts the phone on DND and ##5 takes it off.
Is there a list that we can reference?
Is there a way to display these programmed codes through AMO?

Thanks and have a Blessed day.

Eric

 

[LoPath]

REGEN is your friend. REGEN-SBCSU, REGEN-KCSU and REGEN-SDAT will give you about everything you should need to see how an extension can be rebuilt.

DIS-WABE will show the dial plan. Use GEN and ALL to see everything. The short codes will be in there.

LoPath
Maintain HiPath 4000 V5 & V6, OpenScape Xpert V4, Xpressions, Contact Center

 

[sbcsu]

Also have a look in Tondio
Docs
OpenScape 4000 V7
Look for AMO Descriptions

 

[NYPQ-EN]

Thank you LoPath and sbcsu.

Have a wonderful day today.

Eric