Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Command for opening port in Pix Firewall 501 6-3.4 1
- Thread starter kam72
- Start date
-
1
- #2
PeterHurst
IS-IT--Management
access-list external_access permit udp any host xxx.xxx.xxx.xxx eq 5060
Allows anyone outside to access UDP port 5060 on the firewall .. xxx.xxx.xxx.xxx should be the EXTERNAL IP.
Don't forget once you've opened the ports you'll need to provide a NAT translation to get them to the servers inside if NAT is in use.
Allows anyone outside to access UDP port 5060 on the firewall .. xxx.xxx.xxx.xxx should be the EXTERNAL IP.
Don't forget once you've opened the ports you'll need to provide a NAT translation to get them to the servers inside if NAT is in use.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question