Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

comdial dxp system

Status
Not open for further replies.

schoebo

Vendor
Jan 8, 2008
64
US
does anyone know if there is anyway to do programming through a phone for this system? or were i can even down load the (VMMI) thanks
 
It's been awhile, but I remember that programming with hyperterm or through a phone is cumbersome. I'd get VMMI from the Vertical website, but how about those search engine skills?
I still have several Impacts in the customer base and hyperterm works fine for those....

LkEErie
 
You have to use VMMI to program a DXP. Also you will need a DB9 to RJ45 adapter so you can connect your laptop to it. Here is the pinout for the DB9 adapater:

RJ45-DB9F (most headshells wire out this way) You really only need 2,3, and 5 for this to work
1=nc
2=Red
3=Green
4=nc
5=Black
6=nc
7=Yellow
8=nc

Use a reversing 4wire telephone base cord between this head shell and the “Com” port on the Comdial system. Many times I have just borrowed a phone cord from a system telephone if I needed one.

Turn DIP switch number ONE to on on the DXCPU and plug your cable into RS232 1. Connect at 9600 8N1

I*746* is the default password
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top