I'm trying to dial in hyperaccess 2.10 but get the following error " There is not a port named com 3 available" for the modem that I'm dialling I can only use com 3. I've of course rebooted the machine to see if the port was some how in use and would be freed up but that didn't work. I made sure the port was indeed added. Any suggestions????
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Com port problems.
- Thread starter sigmab
- Start date
I had this problem before, mostly on laptops. For some reason particular companies distribute them with the com ports disabled in the BIOS. This has caused, in my case anyway, a great deal of problemd setting up modems and palm units.
This might be worth a check if all other options have failed.
Cheers.
This might be worth a check if all other options have failed.
Cheers.
- Status
Similar threads
- Locked
- Question