Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Color Mode

Status
Not open for further replies.

gcaluna13

Technical User
Nov 21, 2006
45
US
I want to be able to save new work as a bitmap files.

As far as I can tell, when I create a new document I have to change "color mode" from CMYK to RGB to be able to save as *.BMP

Is this correct?


Or is the another way to save as a bitmap in CMYK color mode?

Is there an huge advantage to using CMYK over RGB... really?

And if I decide to switch to RGB , is there a way to save it as my default "color Mode" when starting a new document? I didn't see it in "preferences."

g.
 
...BMP format doesn't support CMYK...

...CMYK is an output color space used for commercial printing. Some providers prefer an RGB workflow, whilst others frown upon being supplied with RGB images. With RGB images the provider needs to have all images be converted in RIP via color management settings suitable for there presses and proofers...

...the conversion from RGB to CMYK is dependant on the source profiles and destination profiles. You could have the same image with different source profiles attached, converted to different CMYK destination profiles and the color numbers will be different, resulting in a different image...

...RGB has a wider color range than CMYK so basically those really bright hues in RGB get mapped to a CMYK equivalent....

...desktop printers are OK with RGB as the printer drivers are design to receive it and then turn it into CMYK ink on the paper. A printing press however requires four channels (or more for spot colours)...

...RGB is additive as all three make white, CMYK is subtractive to make white (the paper in other words, assuming it is white paper you print onto)...

...some designers we deal with use RGB images in there layouts, which is OK as they are acceptant of out color conversion profiles...

...one thing you want to avoid, is switching modes RGB > CMYK > RGB > CMYK for example, as this will do all sorts of things to color values...

...some people like to color adjust in RGB (or even LAB for some images), whilst others, like me are more used to color adjustment in CMYK...

...if your project is destined for web use then RGB is the way to go, if for print discuss this with you print provider to advise on color conversion settings to use...

...edit > color settings is where it all happens with regards to working spaces and conversion spaces...

...edit > convert to profile is where you go from one space (your working space) to another (RGB > CMYK for example)...

Andrew
 
Thank you much Andrew.

Did you know where the setting is to make it start up (as in creating a new document) automatically as RGB instead of CMYK? Mine is set to CMYK and I really need to save as bitmap for 3rd party software graphics packages. The most widely used and accepted file import for control systems integration packages is the bitmap format.
 

...refering to CS2 or CS3...

...launch photoshop, choose file > new document...

...create an RGB image, blank will do...

...save it somewhere...

...quit and relaunch photoshop...

Andrew
 
Just two words to avoid confusion. Bitmap refers to each and every file made by pixels. So PSD, JPEG, TIFF, PNG, TGA,... are all bitmap. BMP is just the Windows file format.
As Apepp says, every time you make a new file, you have the choice for a lot of characteristics (you can see here Photoshop use the confusing term "Bitmap" for pure black&white !!). Pay also attention : BMP format don't support 16 bit/channel, choose only 8bit/channel if you are working with colors.
Good work
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top