Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

codecs print

Status
Not open for further replies.

marito1

Technical User
Oct 5, 2010
4
RO
hello!!!
COULD SOMEONE HEPLME WITH some MD 110 commands?
1) which is codecs print command to find the codecs priority for ip phones on MD 110 PABX.
2) which is the command to change the codecs (for squealing phones reasons)
THANKS
 
Hi,
<IPGKP:LIM=1;
GATEKEEPER DATA
LIM TIMNET TMLOAD CODECS GKID BPOS
1 5 0 32104BC56789A LIM1 1-0-30
END

<IPGKC:LIM=1,CODECS=0-1-2-3-4-5-6-7-8-9-A-B-C;
EXECUTED

<IPGKP:LIM=1;
GATEKEEPER DATA
LIM TIMNET TMLOAD CODECS GKID BPOS
1 5 0 0123456789ABC LIM1 1-0-30
END

Number CODEC
0 G.729 annex A and annex B
1 G.729 annex B
2 G.729 annex A
3 G.729
4 G.723.1
5 G.723.1 annex C
6 GSM Enhanced Full Rate
7 GSM Full Rate
8 G.728
9 G.711 A-law, 56 kbit/s
A G.711 µ-law, 56 kbit/s
B G.711 A-law, 64 kbit/s
C G.711 µ-law, 64 kbit/s

regards,
Norbert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top