code 2800 and 3200 1

[kscac]

I installed new mx-one,when I checked the LPU Display there is code 3200 and 2800.What is the meaning of this code.

 

[Satellite1900]

The code 2800 is shown when you have problems on tabs DSU, LSU and NIU / IPU, both LEVEL hardware and wiring.
Or you have a GJUL inserted along with a NIU / IPU.
The code 3200 can say 2 things:
Non-LSU connection DSU or missing the Magazine 2

 

[kscac]

this system is only magazine 0 and magazine 1,there is no GJUL.I replace the LSU,DSU and LPU5 but still there is LPU code 2800 and 3200.When I replace the NIU2 the code in LPU display is 4122.

 

[vangee]

I have had the same problems, pull the NIU2 board and place it back again. If you have 2 or more NIU's in the system you should only insert the NIU2 with the flashcard when you power up the LIM.

 

[kscac]

I pullout and return again the NIU2 5 times but the still the LPU display is intermittent,2800 and 3200.The location of NIU2 is in magazine 1.

 

[kank]

put NIU to the magazine 0 and try again

 

[kscac]

The problem solved,I swapped the DSU in mag.0 to mag.1 and DSU in mag.1 to mag.0.