I'm looking at a switch that has 1FB lines coming into remote buildings for 911 notifications, etc. There are two lines that are active, but won't come live in the switch. I looked at the trunk group settings and everything appears consistent.
There are no alarms in the switch, but I do see a couple warnings on the board:
ALARM REPORT
Port Maintenance On Alt Alarm Svc Ack? Date Date
Name Brd? Name Type State 1 2 Alarmed Resolved
03A0601 CO-TRK n 0070/001 WARNING RDY 06/29/11:26 00/00/00:00
03A0601 CO-TRK n 0070/001 WARNING RDY 06/29/11:26 00/00/00:00
Also from the error log we see this for active alarms:
HARDWARE ERROR REPORT - ACTIVE ALARMS
Port Mtce Alt Err Aux First Last Err Err Rt/ Al Ac
Name Name Type Data Occur Occur Cnt Rt Hr St
03A0601 CO-TRK 0070/001 3329 57408 06/29/11:25 06/29/11:27 6 180 5 a y
03A0601 CO-TRK 0070/001 1537 06/29/11:25 06/29/11:27 6 180 5 a y
and this for errors:
HARDWARE ERROR REPORT
Port Mtce Alt Err Aux First Last Err Err Rt/ Al Ac
Name Name Type Data Occur Occur Cnt Rt Hr St
03A06 CO-BD 18 0 06/29/11:25 06/29/11:25 1 0 1 r n
03A0601 CO-TRK 0070/001 2817 57360 04/03/18:47 06/14/18:30 107 0 0 r y
03A0601 CO-TRK 0070/001 3585 57424 04/13/11:52 06/03/13:53 6 0 0 r y
03A0602 CO-TRK 0080/001 3329 57408 05/04/11:03 06/15/16:52 255 0 0 r y
03A0602 CO-TRK 0080/001 1537 05/04/11:03 06/15/16:52 255 0 0 r y
03A0602 CO-TRK 0080/001 2817 57360 06/15/16:54 06/29/10:19 39 0 0 r y
03A0601 CO-TRK 0070/001 257 50176 06/22/10:18 06/25/09:49 2 0 0 r y
03A0601 CO-TRK 0070/001 18 0 06/29/11:25 06/29/11:25 1 0 1 r y
03A0602 CO-TRK 0080/001 18 0 06/29/11:25 06/29/11:25 1 0 1 r y
03A0602 CO-TRK 0080/001 2817 57360 06/29/11:25 06/29/11:25 1 0 0 n y
03A0601 CO-TRK 0070/001 3329 57408 06/29/11:25 06/29/11:27 6 180 3 a y
03A0601 CO-TRK 0070/001 1537 06/29/11:25 06/29/11:27 6 180 3 a y
Do I have a bad board? The TG translations appear to be correct across the board. I'd appreciate any ideas.
thx.
There are no alarms in the switch, but I do see a couple warnings on the board:
ALARM REPORT
Port Maintenance On Alt Alarm Svc Ack? Date Date
Name Brd? Name Type State 1 2 Alarmed Resolved
03A0601 CO-TRK n 0070/001 WARNING RDY 06/29/11:26 00/00/00:00
03A0601 CO-TRK n 0070/001 WARNING RDY 06/29/11:26 00/00/00:00
Also from the error log we see this for active alarms:
HARDWARE ERROR REPORT - ACTIVE ALARMS
Port Mtce Alt Err Aux First Last Err Err Rt/ Al Ac
Name Name Type Data Occur Occur Cnt Rt Hr St
03A0601 CO-TRK 0070/001 3329 57408 06/29/11:25 06/29/11:27 6 180 5 a y
03A0601 CO-TRK 0070/001 1537 06/29/11:25 06/29/11:27 6 180 5 a y
and this for errors:
HARDWARE ERROR REPORT
Port Mtce Alt Err Aux First Last Err Err Rt/ Al Ac
Name Name Type Data Occur Occur Cnt Rt Hr St
03A06 CO-BD 18 0 06/29/11:25 06/29/11:25 1 0 1 r n
03A0601 CO-TRK 0070/001 2817 57360 04/03/18:47 06/14/18:30 107 0 0 r y
03A0601 CO-TRK 0070/001 3585 57424 04/13/11:52 06/03/13:53 6 0 0 r y
03A0602 CO-TRK 0080/001 3329 57408 05/04/11:03 06/15/16:52 255 0 0 r y
03A0602 CO-TRK 0080/001 1537 05/04/11:03 06/15/16:52 255 0 0 r y
03A0602 CO-TRK 0080/001 2817 57360 06/15/16:54 06/29/10:19 39 0 0 r y
03A0601 CO-TRK 0070/001 257 50176 06/22/10:18 06/25/09:49 2 0 0 r y
03A0601 CO-TRK 0070/001 18 0 06/29/11:25 06/29/11:25 1 0 1 r y
03A0602 CO-TRK 0080/001 18 0 06/29/11:25 06/29/11:25 1 0 1 r y
03A0602 CO-TRK 0080/001 2817 57360 06/29/11:25 06/29/11:25 1 0 0 n y
03A0601 CO-TRK 0070/001 3329 57408 06/29/11:25 06/29/11:27 6 180 3 a y
03A0601 CO-TRK 0070/001 1537 06/29/11:25 06/29/11:27 6 180 3 a y
Do I have a bad board? The TG translations appear to be correct across the board. I'd appreciate any ideas.
thx.