Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CO setting issue on TDA100D...

Status
Not open for further replies.

irfan1225

Technical User
Sep 16, 2016
5
SA
Hello

I am a new technician,
my company have installed tda100d system, there installed three direct lines( 2 for call pickup and 1 for out going calls)
i don't no how its configuration, when i see in co setting there showing three trunk group. 1,2,3 . third is for out going
and
DIL table setting
first and second lines have destination 501
third line have destination 601

now i want to change out going direct line, now working is line three, but i need to configure line one for out going calls and two and three for call pickup

plz any help me to resolve this issue


 
Swap the trunk groups the lines are assigned in....I.O.W....re-assign the trunk groups with each line...

501 is (sounds like) Voice Mail / Auto attendant destination (normally 500...but probably the same)

601 is Incoming Call Group....what causes each phone (in that group) to ring...that is standard/default group.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top