Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CO Lines default behavior

Status
Not open for further replies.

Dishmega

MIS
Jan 28, 2005
34
US

If I'm not mistaking the defaul is set to ring on extension 100 (reception). Even if I set the line to ring on this extension (Flash 40) the line won't ring anywhere.

I can see LED 1 blinking on the LCOBC card but thats it.

Does the LCOBC has any line requirements? Cause to test this system I'm just using my DSL Line .. :)

Thanks a lot
 
You nned to check your line.
If analog use at standard phone to check for the dial tone.
Some DSL lines come w/o dial tone.

///doktor
 

I have the fluke TS19 and I can make and receive call on the line.
 
What type of LG PBX do you have?
Your keyset need some LOOP buttons to work,
Check PGM115.

///doktor
 

Sorry Doktor for the delay, the system is a Vodavi XTS LDK-300
I guest every time you say PGM### you are talking about PC Admin, the problem is I can't make this system to work with it. So all my programing is via telephone. So, all I know is **3226 to get into the Admin mode and Flash ### to access the features.



 
Ok. It should be the same way to login to programming mode for both systems.
With the ipLDK-300 we do like this:
[Trans/PGM]+ * + # + [Trans/PGM] and enter the password.
The [Trans/PGM] button is just the button to use if you tranfer calls during a conversation.
So the PGM's and Admin numbers are the same.

///doktor
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top