CO Lines default behavior

[Dishmega]

If I'm not mistaking the defaul is set to ring on extension 100 (reception). Even if I set the line to ring on this extension (Flash 40) the line won't ring anywhere.

I can see LED 1 blinking on the LCOBC card but thats it.

Does the LCOBC has any line requirements? Cause to test this system I'm just using my DSL Line ..

Thanks a lot

 

[doktor]

You nned to check your line.
If analog use at standard phone to check for the dial tone.
Some DSL lines come w/o dial tone.

///doktor

 

[Dishmega]

I have the fluke TS19 and I can make and receive call on the line.

 

[doktor]

What type of LG PBX do you have?
Your keyset need some LOOP buttons to work,
Check PGM115.

///doktor

 

[Dishmega]

Sorry Doktor for the delay, the system is a Vodavi XTS LDK-300
I guest every time you say PGM### you are talking about PC Admin, the problem is I can't make this system to work with it. So all my programing is via telephone. So, all I know is **3226 to get into the Admin mode and Flash ### to access the features.

 

[doktor]

Ok. It should be the same way to login to programming mode for both systems.
With the ipLDK-300 we do like this:
[Trans/PGM]+ * + # + [Trans/PGM] and enter the password.
The [Trans/PGM] button is just the button to use if you tranfer calls during a conversation.
So the PGM's and Admin numbers are the same.

///doktor