phonegirl27
Programmer
Can anyone tell me how to configure CMS for a network printer?
Thanks!
Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CMS Network Printers
- Thread starter phonegirl27
- Start date
- Status
You need to have the Avaya Network Printing Interface installed. You can verify that by typing 'nwpadmin'. It should bring up an admin screen.
Step one is to add the printer to the /etc/hosts file. Then use nwpadmin to add the printer. FInally, open the CMS application, go to Maintenance/Printer Administration and add it there.
Kevin
Step one is to add the printer to the /etc/hosts file. Then use nwpadmin to add the printer. FInally, open the CMS application, go to Maintenance/Printer Administration and add it there.
Kevin
- Status
Similar threads