CMS Link

[phonegirl27]

Switch G3siV12
CMS r13.1

We are trying to connect the switch and CMS, and everything appears to be correct, however the link never comes up.

We have done numerous network tests and have sucessfully ruled that out as the problem. The MIS link from the switch never comes up though.

We were attached to another CMS on Friday and it worked fine (that was a V12CMS).

Thoughts or suggestions on what to try next?

Thanks!

 

[4merAvaya]

Go to the /etc/rc2.d directory and type . ./S99route If the route is there no harm. If it's missing it will build it.

Kevin

 

[phonegirl27]

Just wanted to thank everyone for the very valuable insight on where to look for this problem.

It appears the problem was with a firewall not passing the CMS address through, once we found that and reset all the defaults in CMS, then reprogrammed the switch to match everything was happy. Finally I am no longer being held hostage by the client and I can head home!

Go Colts!

 

[marcell55]

Glad you found the problem!