CMS host file config

[copterride]

Hi,

I need to configure a new CMS Rel 16.1. Pls confirm if the following is correct. Do i need edit /etc/resolvconf as well?

vi /etc/hosts

127.0.0.1 localhost
10.22.8.232 abc-wic-cms abc-wic-cms.coo.com loghost --customer lan
192.168.4.7 abc-wic-cms-clan---private lan to clan
192.168.4.6 switch--clan IP
10.22.8.254 router--default gateway

Vi defaultrouter

10.22.8.254

vi netmasks

10.22.8.0 255.255.255.0

vi nodename

abc-wic-cms

vi hostname.e1000go

abc-wic-cms


What should be e1000g1 interface ? and i dont see hostanme @ the solaris prompt.

Thanks.

 

[4merAvaya]

/etc/hosts:
#
# Internet host table
#
127.0.0.1 localhost
10.1xx.xx.21 r3xxxxx r3xxxxx.tmpdomain.net loghost
10.1xx.xx.30 router
#
10.1xx.xx.39 r3vgifl_1 <-- 2nd NIC
10.1xx.xx.46 router_1 <-- Gateway for 2nd NIC
#
10.xx.xx.xx switch1 #ACD1
10.xx.xx.xx switch2 #ACD2
10.xx.xx.xx switch3 #ACD3
10.xx.xx.xx switch4 #ACD4
10.xx.xx.xx switch5 #ACD5
10.xx.xx.xx switch6 #ACD6
10.xx.xx.xx switch7 #ACD7
10.xx.xx.xx switch8 #ACD8
#

/etc/defaultrouter:
router

/etc/netmasks:
10.xx.xx.16 255.255.255.240
10.xx.xx.32 255.255.255.240

pg /etc/nodename:
r3[uname]

e1000g0 & e1000g1 are the names assigned to the ethernat ports.

Kevin

 

[copterride]

Thanks 4merAvaya,

I assume 2nd NIC is for CLAN.

So my parametes are correct except for 2nd nic gateway.

For some reason it doesnt show hostname at the prompt.