CME FXO Setup

[Tbrennan3613]

Hello. I just order a FXO card for our voice router (Cisco 1760). Would anyone have a sample configuration (line by line) to get the phones able to place outbound calls thought the line connected to the FXO card. Would it be possible to have the phone place outbound calls by dialing "5" before the phone number? Thanks.

 

[AgentK]

Tbrennan3613,

Sorry I don't have any sample handy, but it really is straight forward.
you need to create dial-peer voice pots with destination dial pattern 5911, forward only 3 digits, for 911 calls, and also 5T (most people use 9 to call out, but any digit would work) for regular calls and apply both each port of the fxo card.
Make sure to Dial 5911 to test it; you need to tell the 911 operator that you from a phone company tech wants to test new phone installation and verify your company physical address.

Hope this help.

K

 

[Tbrennan3613]

Yes. This helps a lot. Is there any sample of the commands on the Cisco web-site that you know of? I have been trying to get this working for awhile. Thanks Again.

 

[DallasBPF]

google is your best friend... just search cisco fxo configuration



------------------------------------
Dallas, Texas
Telecommunications Tech
CCVP, CCNA, Net+

CCNP in the works

 

[AgentK]

This may help,

http://www.voip-info.org/wiki/view/CallManager+Express

Email me if you need help.

K.