CM Templates

[wpetilli]

I just finished installing System Platform 6.3 on an s8300D. I'm at the point where I'm going to install the CM template and not sure which one I should be picking. This is a s8300D/G430 Standalone system. The choices are:

CM_Duplex
CM_onlyEmbed
CM_Simplex
CM_surRemoteEmbed
CM_Survremote

 

[montyzummer]

cm only embedded is the one you require , if its a s8300d lsp its surremote embedded , all other servers use the other three.

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[wpetilli]

the install is at the step of 'wait for user to complete data entry' and has been sitting there in progress for 15 minutes. Am I supposed to do something at this point. seems like all the other tasks are in limbo.

 

[montyzummer]

check your pop up blocker ,on the templates install system platform generates pop ups that require your input (bet you a cold beer that's your issue!) , then at the end it will warm you of any info you have not filled in , don't worry at this point just click ok , if it requires anything critical(ntp`s etc) it will not let you go any further.

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[wpetilli]

I'll buy you a 6 pack instead for the non technical waste of your time

 

[montyzummer]

done and done

APSS (SME)
ACSS (SME)
ACIS (UC)