Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CM R6.0 Merging and LSP

Status
Not open for further replies.

Koptan

Technical User
Jan 5, 2012
1
EG
Dear all

Hope everything is going well and i'm blessed to join this forum

if you please i had the following scenario and i need your help

we have a customer with existing System:

S8300D
G430
Running on System Platform CM6.0 for 50 Users

The Customer needs a new Location that will have the following platform:

S8300D
G450
Running on CM6 for 200 Users

The Customer needs to Migrate the License of the EXISTING System to the NEW Location and Convert the Old Server to LSP for the EXISTING 50 Users , so the NEW main gatekeeper will control all the calls

can this be Done on Avaya Solution Designer ? is there a simple method to do so ?

some have suggested that I make a new System having the new server
and add a new location with 50 Users LSP and remove the Hardware of the existing location

can you help please ? thank you all

AMR KOPTAN
 
Hy Guys,
I have a Master dlc0 whith the gateway main and I've a secondary dlc1 and the s8300 lsp in an other location whith 2 media gateway.
If the trunk IP go down the first mediagateway go to record correctly in the dlc0 while the secon gateway go to record incorrectlyon the s8300 lsp server.
I've the same configuration on the two gateway and the same configuration in ACM.
Anyone can to help me to understand why the second gateway go to recording on the lsp server??

Thanks!


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top