Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Andrzejek on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CM Duplex with ESS

Craft01

Technical User
Aug 25, 2013
54
TN
Hi Guys! Can you help on this?

I have a site_1 that has a Duplex CM and 2 G450 in site_2 I have a ESS and a G450. Should I put the ESS PE into MGC list?

If YES, after the main server is cut from the network, the G450 will register with ESS and it takes over.

I want to manually coordinate the Failover and return back to the Main.
 
Yes add it to the list as you will want the dsp resource to bring your ess online, for fail back it's on you to set the rule the way you want it
 
Dont' want ESS to come online automatically, I want to manually coordinate ESS and Main Failover.
 
Hi Guys! Can you help on this?

I have a site_1 that has a Duplex CM and 2 G450 in site_2 I have a ESS and a G450. Should I put the ESS PE into MGC list?

If YES, after the main server is cut from the network, the G450 will register with ESS and it takes over.

I want to manually coordinate the Failover and return back to the Main.
 
not quite sure why but if you want to keep it all manual just change the mgc list in the gateway and only give it the IP you want it to go to. If you want it to auto fail to the ESS and then you move it back then see the links above.
 
I want to manually coordinate the Failover and return back to the Main.
Why would you want to have a manual failover? Return from ESS mode in a manual way I can easily understand but why make your resilience a manual operation?
 

Part and Inventory Search

Sponsor

Back
Top