Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CM 3.1 MO objects 1

Status
Not open for further replies.

pcabn

Technical User
May 14, 2007
22
US
I have disabled MO objects that I am trying to enable. The command is enable MO (logical number) physical location, which in my case 04C. I can't find where I get this logical number. This was originally done by a tier3 when we had a massive power outage. I thought error log or alarms but there is nothing in there. Any ideas? I was told a reboot would clear this out. I prefer not to do that. Thanks
 
list disabled-MOs

enable MO logical 5131 physical 4c

enable MO-all logical 5131

5131 (0x140b) = MO_CAR_POWER Carrier port power supplies

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Thanks for the reply. That worked. Now a M/T Dig alarm showed up on 05A02 and 03 which is a TN771 maint bd.Not sure if related I will have to look at that. Thanks again
 
It's not related.
reseat the tn771
Code:
 GW      TN Circuit Pack                       Latest     Last
MM/TN    Gateway / Media Module     Hardware   Firmware   Update Date
-----    -------------------------  ---------  --------   -----------
TN771  - Maint  TN771 DP Test       All        FW022    - 07/21/14

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top