CM 3.0.1 to 3.1.5 upgrade

[CF831SR]

I am soon to carry out a 3.0.1 to 3.1.5 CM upgrade. All the programmable TN cards will be upgraded to the latest firmware but the following cards are in situ and not upgradeable :-
TN2464 v18 & 20 DS1
TN744D v3 Call Classifier
TN2215 v11 Analogue Line
TN2214B v3 Digital Line.
Can anyone confirm that these cards are compatible with 3.1.5.

Thanks,
Paul.

 

[AvayaTier3]

They should work as well in 3.1.5 as they do in 3.0.1

Use the Intranet to get the QPPCN information
Use links below for questions on FW & Minimum Usable and Certifiable Vintages

ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/media/minhardwarevintages.pdf

https://support.avaya.com/japple/cs...&temp.documentID=200575&temp.releaseID=348072

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[CF831SR]

Thanks for the help. Found the hardware compatibility document and it tells me all I need to know.

 

[daveinwearside]

I am doing the same, Did you go straight to 3.1.5 or did you need to go through steps?

 

[daveinwearside]

Bump...Sorry

 

[Mitch672]

you can go directly to 3.1.5, keep in mind though, if you modify the firewall settings on that old CM 3.0.1 release, your CM will reboot and restart on you (this is an old CM 3.0.1 bug/"feature"), you might end up having to modify the firewall rules, if you need to open port 69 (TFTP), to copy the new firmware to the platform, for example.


Mitch

AVAYA Certified Expert

 

[daveinwearside]

cheers mitch much appreciated!

 

[daveinwearside]

has anyone seen any installation notes on this I can't seem to find any?