BungleBear
Technical User
We have just upgraded our Networker servers to new hardware and version, since doing this our clone script has stopped working.
We have a dxi6700 VTL and we clone the data to a i500 physical tape unit. The i500 is controlled by cloneserver1.
The script below is run.
nsrclone.exe -vv -s backupserver1 -J cloneserver1 -b "i500 clone" -y "20 years" -S -f c:\scripts\clone\ssid1.txt
The following is the error.
There was an attmept to force the user of a recover volume to the storage node fordway-backup4, but the needed tape is not allowed to be mounted there.
This worked in the past but since the move to teh new hardware it has stopped.
Any help would be great.
Mike.
We have a dxi6700 VTL and we clone the data to a i500 physical tape unit. The i500 is controlled by cloneserver1.
The script below is run.
nsrclone.exe -vv -s backupserver1 -J cloneserver1 -b "i500 clone" -y "20 years" -S -f c:\scripts\clone\ssid1.txt
The following is the error.
There was an attmept to force the user of a recover volume to the storage node fordway-backup4, but the needed tape is not allowed to be mounted there.
This worked in the past but since the move to teh new hardware it has stopped.
Any help would be great.
Mike.