fazil1... come on thats no answer
I have slow cloning too, but is better since I started using the following sample script:
#!/usr/bin/ksh
# ################################################################################################
#AUTHOR: Ed Skolnik
#MODIFIED: 2003/02/10 Created
# 2003/03/06 Changed Clone pool from Default Clone to
# GIS Default Clone to allow to recycle to other pools and
# to allow recycle from other pools
# 2003/04/01 EIS Changed to look back 5 days for save sets that have not been cloned
# 2003/04/15 EIS Add Check for NO savesets to clone
# 2003/04/21 EIS Deleted Detail s of what's going to be cloned
# 2003/04/23 EIS Corrected Starting message
# Also echo start to nsr log
# 2003/05/12 EIS Changed sort order for cloning from -omo Media and Offset
# to -otmo Time, Media and Offset
# 2003/05/13 EIS Backout out 05/12 change
# 2003/07/01 EIS Before starting the Clone process make the I/P
# Volumes readonly
# After set them back to notreadonly
# This will keep backup's from trying to use the same volumes
# as what is being used for clone processing.
# 2003/07/11 EIS Check to see if nsrclone is already running if so exit
# exit with Information message
# Also Allow clone when save groups are running if before
# 6:00 AM
# 2003/07/14 EIS Change to only look back 1 day instead of 5 do to
# weekend Network issues
# 2003/07/17 EIS Change wait time to 7.5 minutes from 15
# backup 7/14 change, look back 5 days again
# 2003/0718 EIS If i/p parm = last leave i/p tapes in readonly mode
# The eject process will be modified to only eject used tapes
# in read only mode.
# 2003/07/21 EIS Still having cloning issues si were only cloning from
# 07/21/03 forward
# also added !ssrecycle to selectection
# 2003/08/19 EIS This script will 1st clone all savesets that are complete
# on the volumes, then it will reissue the nsrclone
# to process savesets that spand mult. volumes
# 2003/-8/25 EIS Changed wait time for loops
# 2003/08/27 EIS Changed date format to match Network Daemon.log
# 2003/09/03 EIS add NOT suspect to mminfo for selecting save sets to
# clone (!suspect)
# 2003/09/15 EIS Correct mminfo for volumes was omo should be -omo
# 2003/10/09 EIS Corected ck_nsrclone function to wait if nsrclone is
# running
# 2003/10/28 EIS Syntax error in while loop for checking for
# this script already running....
# 2003/12/01 EIS In order to debug the Networker loop when a tape error
# occurs during cloneing adding Debug code.
# dbgcommand
# 2003/12/08 EIS Added Display of PID for this Run
# Processing:
#
# ################################################################################################
# ########################################################################################
nsr_logline () {
echo $(date +"%m/%d/%y %H:%M:%S") $(basename $0) Version $script_mod $* PID $$ >> $nsrlog
}
ck_for_running_savegrp () {
CT=1
while [ `ps -ef|grep -c 'root .*savegrp'` -gt 1 ] ; do
if [ $CT -gt 20 ] ; then
echo "$(basename $0) $(date) Never started cloning because backups were running all night! nsr_logline Never started cloning because backups were running all night
$(ps -ef|grep 'root .*savegrp' ) " > $tmpmessage
ps -ef | grep -v grep | grep nsr >> $tmpmessage
if [ $(date +%H) -lt 6 ]; then
display_message I
exit 1
else
mailto='chidcgrp,root_page'
display_message A
exit 69
fi
fi
sleep 450
CT=`expr $CT + 1`
done
}
ck_for_nsrclone () {
CT=1
while [ `ps -ef | grep -v grep | grep -c nsrclone` -gt 0 -o `ps -ef | grep -v grep | grep -c $0` -gt 2 ]; do
if [ $CT -gt 60 ] ; then
echo "$(basename $0) $(date) Is already running " > $tmpmessage
nsr_logline nsrclone already running
ps -ef | grep -v grep } grep nsrclone >> $tmpmessage
ps -ef | grep -v grep | grep $0 >> $tmpmessage
echo " " >> $tmpmessage
grep $(basename $0) $nsrlog | tail >> $tmpmessage
display_message I
exit 16
fi
sleep 300
CT=`expr $CT + 1`
echo ....................................
echo "ck_for_nsrclone Debug $(date)"
ps -ef | grep -v grep | grep nsrclone
ps -ef | grep -v grep | grep $0
done
echo "ck_for_nsrclone Debug "
ps -ef | grep -v grep | grep nsrclone
}
display_message () {
case $1 in
A|a) message_level="ALERT";;
I|i) message_level="INFORMATION";;
W|w) message_level="WARNING";;
*) message_level="";;
esac
if [ -r $tmpmessage -a -w $tmpmessage ]; then
:
else
echo "$(basename $0) Error in calling display_message function "
exit 69
fi
echo "$(date) $0 $(uname -n) $message_level $mailto " >> $tmpmessage
mailx -s"$message_level $(basename $0) $(uname -n) $message_level" $mailto < $tmpmessage
cat $tmpmessage
rm $tmpmessage
}
# #################################################################################
# Main Line
# #################################################################################
. /.profile
#
script_mod=$(ls -l $0 | awk '{print $6,$7,$8}')
fromdate="08/07/03"
passdir='/var/tmp'
dtstamp=$(date +%h%d_%H%M%S)
nsrlog=/nsr/logs/daemon.log
#
lastrun="$passdir/$(basename $0)_lastrun"
#
tmpssidonly="/tmp/$(basename $0)_ssid_only.$dtstamp"
tmpssidonly_span=/tmp/$(basename $0)_spanssid_only.$dtstamp
tmpvolumes="/tmp/$(basename $0)_volumes.$dtstamp"
tmpmessage="/tmp/$(basename $0)_message.$dtstamp"
nsrdpid=$(ps -ef | grep -v grep | grep \/nsrd | head | awk '{print $2}')
minusq=""
nsrjb_rc=0
rcx=0
rcx_span=0
mailto='root'
last=$1
# #########################################################################
ck_for_running_savegrp
ck_for_nsrclone
echo "debug $(date) No clone or savegrps should be running"
ps -ef | grep nsrc
ps -ef | grep save
#
minusq="!suspect,!ssrecycle,!incomplete,pool=GIS Default 86,pool='Default',pool='GIS Default',location=STKL40,copies=1,sscreate>5 days ago"
#
echo "$(date +%m/%d/%y) $(date +%H:%M:%S) $(basename $0) Starting " > $tmpmessage
nsr_logline "Starting "
echo " mminfo -t${fromdate} -omo -q $minusq -r'ssid,volume(6),client(15),level,sscreate(19),name" >> $tmpmessage
mminfo -t${fromdate} -omo -q"$minusq" -r'ssid,volume(6),client(15),level,sscreate(19),name' > $tmpssidonly
mminfo -t${fromdate} -omo -q"$minusq" -r'volume' > $tmpvolumes
echo "Number of Savesets to be Cloned $(cat $tmpssidonly | wc -l) " >> $tmpmessage
#cat $tmpssidonly >> $tmpmessage
#
if [ $(cat $tmpssidonly | wc -l ) -eq 0 ]; then
echo "Warning No savesets to Clone " >> $tmpmessage
rm tmpssidonly
display_message W
exit 14
else
display_message I
fi
#
#mminfo -t${fromdate} -omo -q"$minusq" -r'ssid' > $tmpssidonly
cp /dev/null $tmpssidonly
cp /dev/null $tmpssidonly_span
mminfo -t${fromdate} -omo -q"$minusq" -r'ssid,sumflags' | tail +2 | while read ssid sumflag; do
sumflag1=$(echo $sumflag | cut -c1)
case ${sumflag1} in
"c")
# The complete saveset is on this volume, so do it 1st
echo $ssid >> $tmpssidonly
;;
"h")
# Only the header is on this volume
echo $ssid >> $tmpssidonly_span
;;
*)
;;
esac
done
#
if [ -a $tmpvolumes ]; then
nsrjb -v -u
for I in $(cat $tmpvolumes); do
echo "nsrjb -Y -oreadonly $I "
nsrjb -Y -oreadonly $I
if [ $? -ne 0 ]; then
nsr_logline "Unable to mark $I as readonly "
fi
done
if [ -s $tmpssidonly ]; then
echo "/usr/sbin/nsrclone -v -b'GIS Default Clone' -S -f $tmpssidonly "
dbgcommand -p $nsrdpid "Debug=(3)"
nsr_logline "Starting Clone of savesets contained on a single volume"
/usr/sbin/nsrclone -v -b'GIS Default Clone' -S -f $tmpssidonly
rcx=$?
dbgcommand -p $nsrdpid "Debug=(0)"
else
rcx=0
fi
if [ -s $tmpssidonly_span ]; then
echo "/usr/sbin/nsrclone -v -b'GIS Default Clone' -S -f $tmpssidonly_span "
dbgcommand -p $nsrdpid "Debug=(3)"
nsr_logline "Starting Clone of savesets that span volumes "
/usr/sbin/nsrclone -v -b'GIS Default Clone' -S -f $tmpssidonly_span
rcx_span=$?
dbgcommand -p $nsrdpid "Debug=(0)"
else
rcx_span=0
fi
if [ $rcx = 0 -a $rcx_span = 0 ]; then
echo "`date +%m/%d/%Y` " > $lastrun
echo "$(basename $0) Good Run of nsrclone start time $dtstamp" \
>> $tmpmessage
echo "I/p parm ${last:-no} " >> $tmpmessage
echo "Number of Savesets Cloned $(wc -l $tmpssidonly) " >> $tmpmessage
nsr_logline "Ended "
rm $tmpssidonly
rm $tmpssidonly_span
display_message I
else
echo "$(basename $0) Clone alert failed return code $rcx $rcx_span from nsrclone command " > $tmpmessage
echo "start time $dtstamp" >> $tmpmessage
nsr_logline "Failed $rcx $rcx_span"
cat $tmpssidonly >> $tmpmessage
rm $tmpssidonly
rm $tmpssidonly_span
display_message A
fi
else
echo "no clone"
fi
nsrjb -v -u
if [ ${last:-no} = "last" ]; then
:
else
for I in $(cat $tmpvolumes); do
echo "nsrjb -Y -onotreadonly $I "
nsrjb -Y -onotreadonly $I
done
fi
rm $tmpvolumes
# Clean up temp files over 3 days old
find /tmp -name "$(basename $0)*" -type f -mtime +3 -exec rm {} \;
exit 0
# ######################################### End Of Script #####################################
Ed Skolnik
