Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

clone job is not running , looks like in hung state.

Status
Not open for further replies.

v1nsr

Technical User
Oct 4, 2012
50
QA
clone job is not running , looks like in hung state.
When trying to restart the clone job from the NMC , it is not anything. Cannot see nsrclone process running at the task manager. Looks like it is hanging.

Tried below checks from my end :
• After starting the clone job , nothing is appearing on the NMC neither I can find nsrclone process in the task manager.
• Renamed nsrjobd ,temp & nsrladb (tried stop & start the networker services) but no luck.
• When trying to restart the clone job again , it’s not doing anything at all.

Already through with the backup server reboot , but received no luck on this as issue still persists.

We are sitting on version 7.6.4 , any advice on this would be helpful.
 
group clone job completes with no savesets to clone
 
Try to get more info by running the command manually:

nsrclone -vvv -b pool -S ssid

ssid is the save set ID you get via mminfo.

This should tell you a bit more.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top