kenkds
Vendor
- Mar 25, 2004
- 13
Hi Everyone,
I need some help on setting up clocking on a networked Merlin Legend to another Merlin Legend through a point to point PRI. System one has one T1, slot 11 going to system two slot five. System two has two additional T1's slot 7 which is a PRI and slot 8 which is a NetFlex T1 setup as Tie lines. I've included the two printouts of the switches below. I have read the networking reference manual and I’ve tried many different options, but just don’t feel comfortable with any of them. Thanks for any help you can give on this.
SYSTEM INFORMATION SYSTEM ONE
System : Mode AutoMaintBusy AutoBusyTie
: Hybrid/PBX Disable Disable
Language: SystemLang SMDR Printer
English English English
CTI Links :
Direct Line Operators : 1250 1252
Queued Call Operators :
SysProg Port : 1252 Password : craftr4
Transfer : Type Audible OneTouch(Complete) ReturnTimer
: Ring MusicOnHold Transfer(Auto) 9 rings
VMS Transfer Return Interval : 4
Paging System Lines : 808
Music On Hold Line :
Camp On Time : 90 sec
Call Park Return Time : 180 sec
Auto Callback Rings : 4
Extension Status (ESS) : Group Call / CMS
ESS Operators :
SMDR: Min.CallTime CallReport Format UDP
: 40 sec In/Out Basic In/Out
Intercom Dial Tone : Inside
Reminder Service Cancel : :
Behind Switch Code : Drop Transfer Conference
:
Inter-digit Timers (seconds) : 5 24 24 10 10 10 10 5 5
Recall Timer : 450 msec
Second Dial-tone Timer : 0 msec
Rotary Line Cut Through : Delay
Unassigned Extension : 1252
Automatic Backup : :Off
T1/PRI/BRI Clock Synchronization:
Primary Secondary Tertiary
11/1 Loop 11/0 Local
Slot # 0: CKE3 CPU
Slot # 1: 408 GLM-U
Slot # 2: 408
Slot # 3: 408 GS/LS
Slot # 4: 408
Slot # 5: 408
Slot # 6: 016 TRR Ringing Frequency - 25 Hz
Slot # 7: 408
Slot # 8: 408
Slot # 9: 408
Slot # 10: 016 TRR Ringing Frequency - 20 Hz
Slot # 11: 100D
Slot # 12: 008 MLX
Slot # 13: 008 MLX
Slot # 14: 408 GLM-U
Slot # 15: Not Used
Slot # 16: Not Used
Slot # 17: Not Used
SYSTEM INFORMATION System Two
System : Mode AutoMaintBusy AutoBusyTie
: Hybrid/PBX Disable Disable
Language: SystemLang SMDR Printer
English English English
CTI Links :
Direct Line Operators : 1200 1202
Queued Call Operators :
SysProg Port : 1200 Password : craftr4
Transfer : Type Audible OneTouch(Complete) ReturnTimer
: Ring MusicOnHold Transfer(Auto) 6 rings
VMS Transfer Return Interval : 0
Paging System Lines :
Music On Hold Line :
Camp On Time : 90 sec
Call Park Return Time : 180 sec
Auto Callback Rings : 3
Extension Status (ESS) : Group Call / CMS
ESS Operators :
SMDR: Min.CallTime CallReport Format UDP
: 40 sec In/Out Basic In/Out
Intercom Dial Tone : Inside
Reminder Service Cancel : :
Behind Switch Code : Drop Transfer Conference
:
Inter-digit Timers (seconds) : 5 24 24 10 10 10 10 5 5
Recall Timer : 450 msec
Second Dial-tone Timer : 0 msec
Rotary Line Cut Through : Delay
Unassigned Extension : 1200
Automatic Backup : :Off
T1/PRI/BRI Clock Synchronization:
Primary Secondary Tertiary
8/1 Loop 7/1 Loop 5/0 Local
Slot # 0: CKE4 CPU
Slot # 1: 408 GLM-U
Slot # 2: 408 GS/LS
Slot # 3: 008
Slot # 4: 016 TRR Ringing Frequency - 25 Hz
Slot # 5: 100D
Slot # 6: 008
Slot # 7: 100D
Slot # 8: 100D
Slot # 9: 016 TRR Ringing Frequency - 20 Hz
Slot # 10: 008 MLX
Slot # 11: 012
Slot # 12: 012
Slot # 13: 008
Slot # 14: Not Used
Slot # 15: Not Used
Slot # 16: Not Used
Slot # 17: Not Used
I need some help on setting up clocking on a networked Merlin Legend to another Merlin Legend through a point to point PRI. System one has one T1, slot 11 going to system two slot five. System two has two additional T1's slot 7 which is a PRI and slot 8 which is a NetFlex T1 setup as Tie lines. I've included the two printouts of the switches below. I have read the networking reference manual and I’ve tried many different options, but just don’t feel comfortable with any of them. Thanks for any help you can give on this.
SYSTEM INFORMATION SYSTEM ONE
System : Mode AutoMaintBusy AutoBusyTie
: Hybrid/PBX Disable Disable
Language: SystemLang SMDR Printer
English English English
CTI Links :
Direct Line Operators : 1250 1252
Queued Call Operators :
SysProg Port : 1252 Password : craftr4
Transfer : Type Audible OneTouch(Complete) ReturnTimer
: Ring MusicOnHold Transfer(Auto) 9 rings
VMS Transfer Return Interval : 4
Paging System Lines : 808
Music On Hold Line :
Camp On Time : 90 sec
Call Park Return Time : 180 sec
Auto Callback Rings : 4
Extension Status (ESS) : Group Call / CMS
ESS Operators :
SMDR: Min.CallTime CallReport Format UDP
: 40 sec In/Out Basic In/Out
Intercom Dial Tone : Inside
Reminder Service Cancel : :
Behind Switch Code : Drop Transfer Conference
:
Inter-digit Timers (seconds) : 5 24 24 10 10 10 10 5 5
Recall Timer : 450 msec
Second Dial-tone Timer : 0 msec
Rotary Line Cut Through : Delay
Unassigned Extension : 1252
Automatic Backup : :Off
T1/PRI/BRI Clock Synchronization:
Primary Secondary Tertiary
11/1 Loop 11/0 Local
Slot # 0: CKE3 CPU
Slot # 1: 408 GLM-U
Slot # 2: 408
Slot # 3: 408 GS/LS
Slot # 4: 408
Slot # 5: 408
Slot # 6: 016 TRR Ringing Frequency - 25 Hz
Slot # 7: 408
Slot # 8: 408
Slot # 9: 408
Slot # 10: 016 TRR Ringing Frequency - 20 Hz
Slot # 11: 100D
Slot # 12: 008 MLX
Slot # 13: 008 MLX
Slot # 14: 408 GLM-U
Slot # 15: Not Used
Slot # 16: Not Used
Slot # 17: Not Used
SYSTEM INFORMATION System Two
System : Mode AutoMaintBusy AutoBusyTie
: Hybrid/PBX Disable Disable
Language: SystemLang SMDR Printer
English English English
CTI Links :
Direct Line Operators : 1200 1202
Queued Call Operators :
SysProg Port : 1200 Password : craftr4
Transfer : Type Audible OneTouch(Complete) ReturnTimer
: Ring MusicOnHold Transfer(Auto) 6 rings
VMS Transfer Return Interval : 0
Paging System Lines :
Music On Hold Line :
Camp On Time : 90 sec
Call Park Return Time : 180 sec
Auto Callback Rings : 3
Extension Status (ESS) : Group Call / CMS
ESS Operators :
SMDR: Min.CallTime CallReport Format UDP
: 40 sec In/Out Basic In/Out
Intercom Dial Tone : Inside
Reminder Service Cancel : :
Behind Switch Code : Drop Transfer Conference
:
Inter-digit Timers (seconds) : 5 24 24 10 10 10 10 5 5
Recall Timer : 450 msec
Second Dial-tone Timer : 0 msec
Rotary Line Cut Through : Delay
Unassigned Extension : 1200
Automatic Backup : :Off
T1/PRI/BRI Clock Synchronization:
Primary Secondary Tertiary
8/1 Loop 7/1 Loop 5/0 Local
Slot # 0: CKE4 CPU
Slot # 1: 408 GLM-U
Slot # 2: 408 GS/LS
Slot # 3: 008
Slot # 4: 016 TRR Ringing Frequency - 25 Hz
Slot # 5: 100D
Slot # 6: 008
Slot # 7: 100D
Slot # 8: 100D
Slot # 9: 016 TRR Ringing Frequency - 20 Hz
Slot # 10: 008 MLX
Slot # 11: 012
Slot # 12: 012
Slot # 13: 008
Slot # 14: Not Used
Slot # 15: Not Used
Slot # 16: Not Used
Slot # 17: Not Used