Clock not keeping time after power outage

[techwill]

Customer has a MICS 6.1 w/PRI. Every time they loose power clock is behind however long the power was out but no programming is lost.. Any suggestions?

 

[PERRYPJ]

that's the way it works

OLD ROLMEN WORKING ON NORTELS

 

[techwill]

Thanks. But now, I just tried to change the time in the system and at 3 different phones it said I need to release calls.

 

[bkrike]

Make sure there are no calls on hold...reboot the sytem if needed.

If you cant get it at a phone, you can go in via system programming. Once you get the time set you can put the system on a battery back up/ UPS to avoid future problems.

 

[telemarv]

clock stops running when there's a power outage (although it keeps the time from the point of outage)

make sre you're not lifting the handset when you press **TIME

Marv
TeleMarv Services

http://www.telemarv.ca