clock for option 11

[ANESTECH]

GOOD DAY,

ME HAVE A OPTION 11 WITH A DTI, I AM TRYING OF ENABLE THE CLOCK REFERENCE AND I CAN´T DO IT.

I GET THE NEXT ERROR IN LD 60

>LD 60
DTI000
.ENL CC 0

DTI068


.****
>
OVL000
>ERR DTI068
>

DTI0068 c
System clock generator c is not responding.


MY DTI IS IN SLOT 1, I VIEW IN LD 73

REQ PRT
TYPE DTI2
FEAT SYTI


MAND 15
NCSD 15
OSGD 15
OOSC 5
PERS 100
DBNC 10

CCGD 15
CCAR 15

REQ PRT
TYPE DTI2
FEAT SYTI


MAND 15
NCSD 15
OSGD 15
OOSC 5
PERS 100
DBNC 10

CCGD 15
CCAR 15

TYPE DDB

CC DATA NOT 1.5MB
SCH3558

CAN HELP ME?

THANKS

 

[rain78]

Are you sure you having a CC daughterboard installed?

 

[ANESTECH]

MY DTI´S CARDS WORK IT WELL IN OTHER PBX OPTION 11, THE LED CC IS IN GREEN.

HOW I CAN VERIFY THAT THIS CC DAUGHTERBOARD IS INSTALLED?

 

[rain78]

Sounds like its already enabled do a stat CC 0 in ld 60

 

[DFKSydney]

we may be talking about different configurations, but:


REQ prt
TYPE pri2
FEAT syti


CC0 1 PREF CC0 1 <<== tells where the clock is (Lp 1)
SREF CC0 2

CCGD 15
CCAR 15
EFCS NO

Is it possible that you do not have clock location programmed?

 

[cmassjohn]

Is the main board a DTI (1.5Mbps - American) or DTI2 (2Mbps - European)?
European DTI2 is a NTAK10.

The programming depends on the type...



Senior Engineer, cmass

http://www.cmass-ni.com

 

[ANESTECH]

THE CARDS ARE NTAK10AA AND NTAK10DC.